loading

Tailored Camp Solutions to Meet  Custom Needs.

What should be paid attention to in the site selection of rural light steel self-built houses? -wellcamp light steel villa manufacturers

Nowadays, people with identities in many cities fully consider building houses in rural areas for leisure and retirement, and live a rural life. Light steel structure houses are popular among rural house builders because of their faster construction speed, earthquake resistance and wind resistance, beautiful shape, energy saving and environmental protection, and high cost performance. A warm welcome is in line with the prefabricated buildings advocated by our country's policies. But building a house is no trivial matter. Compared with traditional buildings, light steel structure houses are lighter in weight, and the cost of foundation engineering is relatively low. However, the location of the house may be very important. Therefore, after applying for a homestead, you can live a simple life. It is recommended to pay attention to the following six points for reference! Low-lying terrain does not need to be built in low-lying terrain. If the house is in a low-lying place, it is very easy to accumulate water, especially during heavy rains, drainage is undoubtedly a big and difficult project. Even if there is a very good drainage facility in the low-lying place, it will be more efficient than the flat land. Wet, it is very easy to increase humidity, which is harmful to physical and mental health for a long time. If it is already in that position, the apartment structure should pay attention to the orientation, and the north and south are transparent. From the feng shui point of view, the places on the edge of the pond and the cliff are the virtual land. It is better not to build houses in such places, because the geology of such places is sometimes unpredictable, and the foundation is very likely Not very firm, some unpredictable accidents happen. The following types of conditions are not suitable for building houses. Houses cannot be built on mountainsides and cliffs. Such underground conditions are full of dangers, the geological conditions are unknown, and they are not suitable for living. It is not necessary to build on too high terrain. The terrain is remote and the surrounding area is empty. The occupants of such a house will feel a sense of loneliness. If the back mountain is too steep, it should not be built on the back of the mountain, otherwise the mountain will give people a sense of discomfort. Freshly filled land There is no need to rush to build a house on a homestead that has just been filled. If it was filled by a large ditch or pond before, the foundation is not solid, and the ground may collapse or crack. Pay attention to it for a while. Make sure the foundation is stable before starting work to prevent accidents. For farmland, it is better not to choose paddy fields as a base for building houses. If there is only an opportunity to turn farmland into a homestead to build a house, try to wait until the crops are harvested before starting construction. Otherwise, after the crops or tree roots left in the ground rot, it will endanger the stability of the foundation. It needs to be compacted during construction, and the foundation should be extra reinforced. It is better not to use the landfill as residential land if the landfill is filled. It is because the garbage is piled up for a long time in the garbage dump, and the generated filth and bacteria seep into the ground, which is not good for the health of the occupants after building a house on it. If it must be used as a homestead to build a house, try to do a good job of cleaning and disinfection first, dig out the topsoil and discard it, and fill it with new soil. Filled waste wells Filled waste wells are likely to cause groundwater to seep out and lead to unstable foundations. Digging the wells too deep will cause the ground gas to dry up. The moisture or dry gas of the waste wells is not good for the health of the family.

GET IN TOUCH WITH Us
recommended articles
Knowledge News BLOG
no data
Customer service
detect